18ft Crane , Tripod Stand
Jr. Pan and Tilt Head
LCD Monitor Arm & Joystick Box
Special Features- Can be used as 14ft and 10ft Jib
Easy one person assembly in minutes
Triangular forged boom for superior strength
All Aluminum non reflective black anodized construction
Infinite balance control
3 ribbed arm sections
Full 18' rise
A best of all price point- less than $1,200
For all those occasions where 'the money shot' needed a crane move to 'sell it', but budgets cut the rental of dolly, track, set up time and personnel, hdvshop comes to the rescue. Our PROAIM 18' crane, is a professional camera platform that eliminates conventional 'old style' cinematography requirements and puts those money shots where they belong, on your demo reel.
Fully Ribbed Sections for strength allows camera weights from 10 to 16.5 lbs without the Head and from 6 lbs to 10 lbs with the head.
Heavy duty adjustable Metal Wire System accepts weights of modern dv/hdv heavy cameras without any bending making our PROAIM 18' Jib Arm a very stable camera platform.
Tilting movements achieved with the on board control handle.
Each jib kit comes complete with its own stand - no expensive tripod required.
Stronger weight bar to achieve perfect balance.
Uses standard household style exercise weights. (1 inch hole)
Fixed camera angle achieved when controlling handle is pin locked.
Breaks down into five easily transported sections.
Triangular boom designed for increased strength and minimal weight.
Easily attached to the Jib Stand.
All aluminum construction.
Portable easy to carry in supplied custom made carrying case.
Can be assembled by one person in a matter of minutes.
Height from the ground - 18ft (when tripod adjusted at 5.5ft)
Length of Crane - 17.2ft
Length of Crane from tripod to camera plate - 13.8ft
Weight of Jib Crane - 33lbs
Weight of Jib Stand 10 lbs
JIB STAND TECHNICAL INFO:-
Made of Aluminum Black anodized.
Base spread: 32"- 48"
Height adjustment 44"-80"
Collapsed height 46"
Rock solid support system.
Safety Pin for Security.
Weight capacity of the stand is 200lbs(90kg)
Jr. PAN TILT HEAD
Don’t let Jr. in the name fool you. The lineage of ‘built in’ quality design and engineering matches that of its big brother for capability and ease of use. Add industrial grade electronics and remote control operation and you have an unbeatable combination of form and function for cameras 10 lbs. or less.
360 degree end less tilting movement and 360 degree panning movement with reversal point.
Variable speed is easily controlled and adjusted by "Speed" and "Dead Spot" potentiometers on the control unit.
Dead spot control determines the center band of the joystick for zero motion. Set it to ensure no crossover to the other axis when not wanted.
For occasionally exterior shooting rain cover protection is required.
The Head comes with a custom fit foam lined carrying case
Delivered with ‘in place’ wiring to Top and Bottom Motor. To power up Install the Power out to head (3 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.
Maximum camera weight: 10 lbs.
Pan movement: 360 degrees.
Tilt movement: 360 degrees.
Variable-controlled speed from 6 degrees/sec (low speed) to 51 degrees/sec (high speed).
Precision machined parts with industrial grade electronic components.
AC Adapter input - AC 100 - 240V output - DC 12V -2A.
Dual high torque, coreless, DC motors for pan and tilt functions.
2 minute travel time to pan at 360 degrees at its slowest speed without stopping and 7 seconds at its highest speed.
Consistent movement at its slowest speed without stopping.
The camera platform height can be adjusted at any point.
The PROAIM™ PAN TILT HEAD comes with Joystick control system, 23 foot long cable and AC Adapter.
The joystick may be operated in the handheld position, from a flat surface such as a table top, or attached to the boom arm of Jib.
For Outdoor shooting, you can use 1.5mtr long 3pinXLR cable with a 12volt Brick or Car Battery.
PROAIM POWER PACK is highly simple, no-nonsense and affordable block battery that has no travel restrictions. Available in two colors Yellow and Black. The default order color is yellow. Black needs to be specified upon order.
Fully charged indicates green
Low voltage Time to recharge shows red
Yellow blinking LED shows when a fault is discovered
WORLDWIDE UNIVERSAL ADAPTER -COMPLIMENTARY It includes a compact one piece unit with 4 international a/c fittings and we even designed in a child protection safety shutter, power indicator and surge protector. Adapter fits plugs in Europe.UK/USA/JAPAN/AUSTRALIA/ SPAIN and almost every country in the world.